|
see an application at a mexico hydro electric plant here
Click on each thumbnail for larger image
Details:
This unit is mounted in a 3/4" SS ball valve housed in brass.
The slip fitting is Swagelok with Teflon compression seals.
Center tube is 304 Stainless 1/8" with .250"x .050" split orifice.
Receiver port is Schrader S/S 304 with Teflon spring seat.
Housing is S/S 316- OD 0.625" (5/8") tubing with a 0.035" wall.
Safety wire is S/S multistrand cable 0.080" Dia. with S/S clamps.
Inner body is epoxy filled for water tight seal and strength.
Air injector is easily removed for cleaning and service through
ball valve port and Teflon seal.
Max Pressure Rating = 200 PSI @ Teflon Seal
Orifice Spec: Length 0.250" Width 0.050"
Total area = 0.0125 sq/in
TEL. 1-800-649-5331
|